Placing The Indoor Unit In Position - Samsung MH080FXEA4B Installation Manual

Placing the Indoor Unit in Position

Once you have checked that there are no leaks in the system, you can insulate the
piping, hose and cables and place the indoor unit on the installation plate.
1
To avoid condensation problems, place heat-resistant polyethylene foam
separately around each refrigerant pipe in the lower part of the indoor unit.
2
Wind insulating tape around the pipes, assembly cable and drain hose.
3 Place the resulting bundle carefully in the lower part of the indoor unit,
making sure that it does not jut out from the rear of the indoor unit.
4 Hook the indoor unit on to the installation plate and move the unit to the
right and left until you are sure that it is securely in place.
5
Finish wrapping vinyl tape around the rest of the piping leading to the
outdoor unit.
6 Using clamps (optionally supplied), attach the piping to the wall wherever
possible.
FJM_IM_DB98-31792_E_6.10.10.indd 29
C I
OMPLETING THE NSTALLATION
Installation plate
29
E-
2010-6-10 9:54:22