Assigning Address To Indoor Unit - Samsung MH080FXEA4B Installation Manual

Assigning Address to Indoor Unit

1
Before installing the indoor unit,assign an address to the indoor unit
according to the air conditioning system plan.
2 The address of the indoor unit is assigned by adjusting MAIN(SW02) switch.
3 The MAIN address is for communication between the indoor unit and the outdoor
unit. Therefore, you must set it to operate the air conditioner properly.
4
It is required to set the RMC address if you install the wired remote control-
ler and/or the centralized controller.
5
If you install optional accessories such as the wired remote controller, central-
ized controller, etc. see an appropriate installation manual.
6 If an optional accessory is not installed, you do not have to set the RMC
address. However, adjust K1 and K2 switches of the SW05 DIP switch to "ON"
position in this case.
7
Set the MAIN address by adjusting the rotary switch(SW02) from 0 to 9. Each
indoor unit connected to the same outdoor unit must have different address.
FJM_IM_DB98-31792_E_6.10.10.indd 23
K1 K2 K3 K4 K5 K6 K7 K8 K9 K10K11 K12
C I
OMPLETING THE NSTALLATION
23
E-
2010-6-10 9:54:16