Deciding On Where To Install The Air Conditioner - Samsung MH080FXEA4B Installation Manual

C I
OMPLETING THE NSTALLATION

Deciding on where to install the Air Conditioner

Indoor unit
 There must be no obstacles near the air inlet and outlet.
 Install the indoor unit on a ceiling that can support its weight.
 Maintain sufficient clearance around the indoor unit.
 Make sure that the water dripping from the drain hose runs away correctly and safely.
 The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
 After connecting a chamber, insulate the connection part between the indoor unit and the chamber with t10 or
thicker insulation. Otherwise, there can be air leak or dew from the connection part.
Space requirements for installation & service
 Construction Standard for Inspection Hole.
1) In case, the ceiling is textile, Inspection hole dose not need.
2) In case, the ceiling is plaster board, Inspection hole depends on Inside height of the ceiling.
a. Height is more than 1m : Only "B" [Inspection for PBA] is applied.
b. Height is less than 1m : Both "A" & "B" are applied.
c. "A" & "B" are inspection holes.
 You must have 20mm or more space between the ceiling and the bottom of indoor unit. Otherwise, the noise from the vibration of
indoor unit may bother the user.When the ceiling is under construction, the hole for check-up must be made to take service, clean
and repair the unit.
 It is possible to install the unit at an height of between 2.2~2.5m from the ground, if the unit has a duct with a well defined lenght
(300mm or more), to avoid fan motor blower contact.
6
E-
FJM_IM_DB98-31792_E_6.10.10.indd 6
Unit Width(W)
"A"=W+100mm "B"=500mm
20mm or more
20mm or more
2010-6-10 9:53:15