Text Display/Change; Text Change - Panasonic PT-LM2E Operating Instructions Manual

NOTE:
B The entered password will
appear as . It will not be
displayed on the screen.
B If you enter the wrong
password, the letters
"PASSWORD" and "NEW" will
become red. Enter the correct
password again.
46-E
NGLISH
TEXT DISPLAY
The setup letters can be displayed
at the bottom of the projected image
while an image is projected.
ON
"TEXT DISPLAY" is enabled.
OFF
"TEXT DISPLAY" is disabled.

TEXT CHANGE

The setup letters which will be
displayed when "TEXT DISPLAY" is
set to "ON" can be changed.
Press the ENTER button to display
the "TEXT CHANGE" screen.
T E X T C H A N G E
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z 0 1 2 3
4 5 6 7 8 9 . : ; / + -
@
B S O K
# Press the F, G, I and H
buttons to select the characters,
then press the ENTER button.
(You can enter 22 characters
continuously.)
C Select "BS" to delete a
character.
$ Press the F, G, I and H
buttons to select "OK", then press
the ENTER button.
C Select "Cancel" to cancel the
change.
Cancel