Basic operations using the remote control (continued)
Changing the picture
aspect ratio
You can toggle through an appropriate set of aspect
ratios for a given input signal.
1.
Press ASPECT on the remote
control.
•
The setting will change as follows each time
ASPECT is pressed.
VID AUTO (PRI.)
S1 AUTO
VID AUTO
HV FIT
V FIT
Note
•
Some aspect ratios may not be available for
selection depending on the input signal. Refer to
"Adjusting the aspect ratio" for details. (p. 59)
48 – ENGLISH
DEFAULT
THROUGH
16:9
4:3
H FIT