Installation Dimensions Diagram - Panasonic PT-DW100U Operating Instructions Manual

Installation (continued)

Installation dimensions diagram

Figure 1 : Dimensions applying when
one unit is used
Exhaust
Attention
• Leave a space of 50 cm (19.7˝) or more behind the projector for replacing the lamp and ensuring the air exhaust
vents are not blocked.
• Set up the projector so that air can flow freely around the rear of the projector. In addition, leave a space of
30 cm (11.8˝) or more at the sides so that the hot air coming out from the air outlet vents does not get drawn in
through the air intake vents.
• Set up the projector with a space of 40 cm or more at the front so that the air filter can be replaced.
• When the projector is to be placed inside a box and used, ensure the structure has a duct or the like to
discharge air from the box, leave the clearances shown in Fig. 2, and ensure the temperature during operation
remains within the 0 ° C to 35 ° C range.
24 – ENGLISH
Figure 2 : Dimensions applying when
50 cm (19.7˝) 50 cm (19.7˝)
or more or more
Exhaust
Exhaust
40 cm (15.7˝)
or more
two units are used)
50 cm (19.7˝) 50 cm (19.7˝)
50 cm (19.7˝) 50 cm (19.7˝)
or more or more
or more or more
50 cm (19.7˝) 50 cm (19.7˝)
40 cm (15.7˝) 40 cm (15.7˝)
or more or more
or more or more
10 cm (3.9˝) or more 10 cm (3.9˝) or more
Figure 3 : Maximum rotation
allowable
+15° +15°
+15° +15°
FILTER
CLEANING
+15° +15°
+15° +15°
OPEN
CLOSE