Panasonic PT-D10000E Operating Instructions Manual page 61

Blanking adjustment
Blanking adjustment fine-tunes the images projected
by the video deck or other devices when the noise
appears on the edges of the screen or if a part of the
image lies slightly offscreen.
1. Press ▲▼ to select "BLANKING".
ADVANCED MENU ADVANCED MENU
DIGITAL CINEMA REALITY DIGITAL CINEMA REALITY
BLANKING BLANKING
INPUT RESOLUTION INPUT RESOLUTION
CLAMP POSITION CLAMP POSITION
EDGE BLENDING EDGE BLENDING
FRAME DELAY FRAME DELAY
RASTER POSITION RASTER POSITION
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
. Press ENTER.
• The "BLANKING" adjustment screen will be
displayed.
BLANKING BLANKING
UPPER UPPER
0 0
LOWER LOWER
0 0
LEFT LEFT
0 0
RIGHT RIGHT 0 0
MENU SELECT MENU SELECT
ADJUST ADJUST
3. Press ▲▼ to select the desired
item for adjustment.
4. Press ◄► to adjust blanking.
• The adjustment value for the PT-D10000E can
be changed within a range of 0 to 255 vertically
and 0 to 700 horizontally.
• The adjustment value for the PT-DW10000E
can be changed within a range of 0 to 540
vertically and 0 to 960 horizontally.
When correcting the upper blanking of the When correcting the upper blanking of the
screen (top) screen (top)
Press ◄ button to move the Press ◄ button to move the
blanking zone upward; ► blanking zone upward; ►
button to downward. button to downward.
When correcting the lower blanking of the When correcting the lower blanking of the
screen (bottom) screen (bottom)
Press ► button to move the Press ► button to move the
blanking zone upward; ◄ blanking zone upward; ◄
button to downward. button to downward.
AUTO AUTO
OFF OFF
DEFAULT DEFAULT
When correcting the left hand blanking of the When correcting the left hand blanking of the
screen (left) screen (left)
Press ► button to move the Press ► button to move the
blanking zone to the right; ◄ blanking zone to the right; ◄
button to the left. button to the left.
When correcting the right hand blanking of When correcting the right hand blanking of
the screen (right) the screen (right)
Press ◄ button to move the Press ◄ button to move the
blanking zone to the right; ► blanking zone to the right; ►
button to the left. button to the left.
Adjusting the input resolution
Input resolution adjustment achieves the best image
when the screen flickers or halo is observed around
the contour.
1. Press ▲▼ to select "INPUT
RESOLUTION".
ADVANCED MENU ADVANCED MENU
DIGITAL CINEMA REALITY DIGITAL CINEMA REALITY
BLANKING BLANKING
INPUT RESOLUTION INPUT RESOLUTION
CLAMP POSITION CLAMP POSITION
EDGE BLENDING EDGE BLENDING
FRAME DELAY FRAME DELAY
RASTER POSITION RASTER POSITION
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
. Press ENTER.
• The "INPUT RESOLUTION" screen will be
displayed.
INPUT RESOLUTION INPUT RESOLUTION
TOTAL DOTS TOTAL DOTS
1344 1344
DISPLAY DOTS DISPLAY DOTS 1024 1024
TOTAL LINES TOTAL LINES
DISPLAY LINES DISPLAY LINES
MENU SELECT MENU SELECT
ADJUST ADJUST
. Press ▲▼ to select "TOTAL
DOTS", "DISPLAY DOTS", "TOTAL
LINES" or "DISPLAY LINES", and
the press ◄► to adjust it.
• Each item automatically displays a value in
response to the type of the input signal. If
vertical stripes appear on the screen or the
image is partly missing, increase or decrease
the displayed value while observing the screen
to achieve the optimal value.
AUTO AUTO
OFF OFF
DEFAULT DEFAULT
809 809
768 768
ENGLISH –
61