Panasonic PT-D10000E Operating Instructions Manual page 45

Changing the picture
aspect ratio
You can change the aspect ratio for projected pictures
to match the input signal.
1. Press ASPECT on the remote
control.
• The setting will change as follows each time
ASPECT is pressed.
VID AUTO (PRIORITY) VID AUTO (PRIORITY)
S1 AUTO S1 AUTO
VID AUTO VID AUTO
HV FIT HV FIT
H FIT H FIT *2 *2
*1: PT-D10000E Only
*2: PT-DW10000E Only
Note
• Some aspect ratios may not be available for
selection depending on the input signal. Refer to
"Adjusting the aspect ratio" for details. (p. 57)
DEFAULT DEFAULT
THROUGH THROUGH
16:9 16:9 *1 *1
4:3 4:3 *2 *2
S4:3 S4:3 *1 *1
45
ENGLISH –