Panasonic PT-D10000E Operating Instructions Manual page 32

Installation of input module (optional) (continued)
Connecting signals to the DVI-D input module
• • Pin assignments and signal names of DVI-D input Pin assignments and signal names of DVI-D input
terminal are listed in the table at right. terminal are listed in the table at right.
- -
Note
• The DVI-D signal input module supports only a single link.
• The HDMI-DVI-D conversion cable is required to connect an HDMI-compliant device.
• The EDID mode setting must be selected so that it corresponds to the device to be connected. (p. 72)
• It is possible to connect the DVI-D input module with an HDMI- or DVI-D-compliant device, but with some devices
the images may not appear or other problems may be encountered in operation.
*1: The LAN terminal of the input module (optional) cannot be used with the PT-D10000E/PT-DW10000E. Use the
LAN terminal that is provided as standard with the projector.

– ENGLISH
DVI-D input module (optional) DVI-D input module (optional)
DVI Module DVI Module
ET-MD77DV ET-MD77DV
DVI-D signal DVI-D signal
PC with DVI output PC with DVI output
# # + +
4 4
5 5
= =
Outside view Outside view
ET-MD77DV ET-MD77DV
DVI-D IN DVI-D IN LAN LAN
LAN terminal LAN terminal
(10BASE-T/100BASE-TX) (10BASE-T/100BASE-TX)
DVD player or high-vision video DVD player or high-vision video
deck equipped with DVD/HDMI deck equipped with DVD/HDMI
terminal terminal
Pin Pin
No. No.
T.M.D.S data 2– T.M.D.S data 2–
# #
T.M.D.S data 2+ T.M.D.S data 2+
$ $
T.M.D.S data 2/ T.M.D.S data 2/
% %
4 shield 4 shield
& &
( (
DDC clock DDC clock
) )
DDC data DDC data
* *
+ +
T.M.D.S data 1– T.M.D.S data 1–
- -
T.M.D.S data 1+ T.M.D.S data 1+
. .
T.M.D.S data 1/ T.M.D.S data 1/
/ /
3 shield 3 shield
0 0
*1 *1
Pin Pin
Signal Signal
No. No.
1 1
+5V +5V
2 2
Ground Ground
3 3
Hot plug detection Hot plug detection
4 4
T.M.D.S data 0- T.M.D.S data 0-
5 5
T.M.D.S data 0+ T.M.D.S data 0+
6 6
T.M.D.S data 0/ T.M.D.S data 0/
7 7
5 shield 5 shield
8 8
9 9
T.M.D.S clock shield T.M.D.S clock shield
: :
T.M.D.S clock+ T.M.D.S clock+
; ;
T.M.D.S clock– T.M.D.S clock–
= =
Signal Signal