Panasonic PT-D10000E Operating Instructions Manual page 117

Dlp based projector commercial use
Hide thumbs Also See for PT-D10000E:
Table of Contents

Advertisement

Model No.
RGB input
terminal
Video input/
output terminal
S-video input
terminal
Interface
ports
DVI-D input
terminal
LAN terminal
Serial input/
output terminal
Remote1 input/
output terminal
Remote terminal
Length of power supply cord
Cabinet
Outside dimensions
Working environment
condition
Working environment
condition
Power source
Operation range
Remote
Mass
control
Outside
dimensions
Option
*1 Interlace signals are not supported even when the EDID2 mode is selected.
*2 70˝ – 300˝ for ET-D75LE5
*3 If using the projector at high altitudes (1 400-2 700 m), the ambient operating temperature should be 0°-40°C.
PT-D10000E
1 set of high-density, D-sub 15p (female)
[For YP
P
input]
B
R
Y: 1.0 V [p-p] synchronization signal included, P
[For RGB input]
0.7 V [p-p] 75 Ω For G-SYNC: 1.0 V [p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC.
1.0 V [p-p] 75 Ω (Active through for Video output)
Y 1.0 V [p-p] C 0.286 V [p-p] 75 Ω Compliant with S1 signals
HDCP (Single link only) compatible
1 set (Used for network connection)
D-sub 9-pin (female/male), RS-232C compliant
Used for personal computer control
Wired remote control, used for link control
Width: 578 mm, Height : 320 mm, Depth: 643 mm
Ambient temperature
Ambient humidity: 10 % to 80 % (no condensation)
approx. 30 m (in front of beam receiver)
Width: 51 mm, Thickness: 23 mm, Depth: 176 mm
Hanging attachment (For high ceiling): ET-PKD100H
Hanging attachment (For low ceiling): ET-PKD100S
Projection lens:
DVI-D input module:
SD-SDI input module:
HD/SD-SDI input module:
Replacement Lamp Unit:
PT-DW10000E
P
: 0.7 V [p-p] 75 Ω
B
R
1 set BNC
1 set Mini DIN 4p
1 set
DVI 1.0 compliant
10BASE-T/100BASE-TX
PJLink™ compatible
1 set each for M3 pin jack
D-sub 9p (female)
Used for external control
3.0 m
Molded resin
32 kg (without lens)
*3
: 0 °C to 45 °C
3 V DC (two AA dry cells)
134 g (including dry cells)
ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4,
ET-D75LE5, ET-D75LE6, ET-D75LE8
ET-MD77DV
ET-MD77SD1
ET-MD77SD3
ET-LAD10000 (single bulb), ET-LAD1000F (4 bulbs)
117
ENGLISH –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-dw10000ePt-dw1000e

Table of Contents