Ordering Spare Parts - Stihl MS 171 Instruction Manual

English
3/8" Picco chain
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm
Chain sprocket
6-tooth for 3/8" P (spur sprocket)
Cutting Attachments for MS 181,
MS 181 C
Actual cutting length may be less than
the specified length
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic E guide bars
Cutting lengths: 30, 35, 40 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm
Nose sprocket: 9-tooth
3/8" Picco chain
Picco Micro 3 (63 PM3) Type 3636
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.3 mm
Chain sprocket
6-tooth for 3/8" P (spur sprocket)
Cutting Attachments for MS 211,
MS 211 C
Actual cutting length may be less than
the specified length
50
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic E guide bars
Cutting lengths: 30, 35, 40 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm
Nose sprocket: 9-tooth
3/8" Picco chain
Picco Micro 3 (63 PM3) Type 3636
Picco Super 3 (63 PS3) Type 3616
Picco Duro 3 (63 PD3) Type 3612
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.3 mm
Chain sprocket
6-tooth for 3/8" P (spur sprocket)
Other cutting attachments
Other cutting attachments complying
with CSA Standard Z 62.3 are available:
see section CSA Standard Z 62.3, the
"Chain Leaflet" inside the chain box or
contact your local STIHL dealer.
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
MS 171, MS 171 C, MS 181, MS 181 C, MS 211, MS 211 C

Ordering Spare Parts

Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
Model
Serial number
Guide bar part number
Chain part number