Ordering Spare Parts - Stihl MSE 250 C Instruction Manual

Rollomatic E guide bars
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 40, 45, 50 cm (16, 18,
20 in.)
Pitch: 3/8" (9.32 mm)
Groove width: 1.3 mm (0.050) or
1.6 mm (0.063 in.)
Sprocket nose: 10-tooth, 11-tooth
Actual cutting length will be less than
listed bar length.
Saw chain 3/8"
Low kickback STIHL saw chain (with
green label)
Rapid Super 3 (33 RS3) Type 3624
Rapid Micro 3 (33 RM3) Type 3662
Rapid Duro 3 (33 RD3) Type 3681
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.3 mm (0.050 in)
Low kickback STIHL saw chain (with
green label)
Rapid Super 3 (33 RS3) Type 3626
Rapid Micro 3 (36 RM3) Type 3664
Rapid Duro 3 (36 RD3) Type 3683
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.6 mm (0.063 in)
Chain sprocket
7-tooth for 3/8" (rim sprocket)
To comply with the 45 degree computed
kickback angle requirement of Section
19.108 of UL 60745-2-13 (and Section
5.11 of ANSI/OPEI B175.1-2012), use
replacement saw chains listed above or
elsewhere by STIHL as conforming with
those requirements when used on this
model chain saw or use saw chains
MSE 250 C
classified as "low kickback" in
accordance with
ANSI/OPEI B175.1-2012.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.

Ordering Spare Parts

Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
Model
Serial number
Guide bar part number
Chain part number
See "Specifications" in this manual for
the recommended reduced kickback
cutting attachments.
English
43