Guide To Using This Manual 2 Ordering Spare Parts - Stihl MS 651 Instruction Manual

Chain pitch .404"
Left handle:
Right handle:
Chain pitch .404", with loop handle
Left handle:
Right handle:
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
The CO value measured in the EU type
2
approval procedure is specified at
www.stihl.com/co2.
The measured CO value was
2
determined on a representative engine
in accordance with a standardized test
procedure under laboratory conditions
and does not represent either an explicit
or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission
requirements are fulfilled by the
intended usage and maintenance
MS 651
described in this instruction manual. The
type approval expires if the engine is
2
7.4 m/s
modified in any way.
2
7.4 m/s
2
8.3 m/s
2
7.4 m/s
2
Ordering Spare Parts
Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
Model
Serial number
Guide bar part number
Chain part number
English
45