Rs232C; System Information; Fan Control1; Fan Control2 - Panasonic PT-DW5000UL Operating Instructions Manual

OPTION2 settings

RS232C

This sets the communication parameters at the
serial terminals.
For details on the serial terminals, refer to "Using
the serial terminals" (pages 39).
IN BAUDRATE
IN PARITY
OUT BAUDRATE : 9 600, 19 200 or 38 400 is
OUT PARITY
VPS SYSTEM
GROUP

SYSTEM INFORMATION

The projector's system information can be viewed.
SYSTEM INFORMATION
ROM VERSION
SET RUNTIME
LAMP1 LOW
HIGH
TOTAL
LAMP2 LOW
HIGH
TOTAL
LAMP1 ON
LAMP2 ON
LAMP1 TYPE
LAMP2 TYPE

FAN CONTROL1

The fan can be controlled in accordance with the
operating conditions.
NORMAL : Standard setting
HIGHLAND : This is selected when using the
projector at an altitude of over
1 400 meters.
36
: 9 600, 19 200 or 38 400 is
selected.
: NONE, EVEN or ODD is
selected.
selected.
: NONE, EVEN or ODD is
selected.
: MASTER or SLAVE is
selected.
: A to Z is selected. MASTER
or SLAVE is also selected.
1. 00. 00
300h
100h
200h
300h
100h
200h
300h
20
20
LAD55
LAD55
RETRN

FAN CONTROL2

The fan can be controlled in accordance with the
direction in which the images are to be projected.
HORIZ. : Standard setting
VERTICAL : This is selected when projecting
images at a significant angle toward
the vertical (more than 30 degrees
from the horizontal).
V
H 30° 30° H
30° 30°
V
• Select the correct FAN CONTROL2
Attention
setting in accordance with the direction
in which the images are to be projected.
Using the projector at the wrong FAN
CONTROL2 setting will shorten the
service life of the lamps.

FUNC1

The user can set the function for the remote
control's FUNC1 button.
LAMP POWER:
The button functions in the same way as
"LAMP POWER" of "OPTION2".
ASPECT:
This button has the same functions as
"ASPECT" of "POSITION".
SUB MEMORY LIST:
This button has the same functions as "SUB
MEMORY LIST" of "OPTION1."

AUTO POW.OFF

The projector can be automatically set to the
standby mode if no signals are input for the set
duration.
DISABLE:
Standard setting. This function is set to OFF.
45MIN.–90MIN.:
The duration can be set in 15-minute
increments from 45 to 90 minutes.
• The auto power OFF function does not
Note
work while the freeze function is used.

PASSWORD

This function is used by a service person.
Input the password with the numeric buttons (0 to
9) of the remote control and press ENTER button to
confirm the entry.
H: HORIZ.
V: VERTICAL