Automatic Adjustment (Auto Setup); Using The Freeze Function; Using The Shutter Function; Using The Digital Zoom (- D.zoom +) Function - Panasonic PT-DW5000UL Operating Instructions Manual

Automatic adjustment (AUTO SETUP)

Automatic adjustment function adjust the resolution, clock phase and image position automatically when dots-
structured analog RGB signals such as computer signal are supplied. (Automatic adjustment is not available if
moving picture input signals or signals having a dot clock frequency of more than 108 MHz are supplied.) When
DVI signals are input, the image position is adjusted automatically.
It is recommended to supply images with a bright white frame at the outermost periphery containing characters etc.
that are clear in white and black contrast when the system is in automatic adjustment mode. Avoid supplying
images that involve halftones or gradation such as photographs and computer graphics.
• "CLOCK PHASE" may have been shifted even when the adjustment ended normally.
Note
In this case, manually adjust the "CLOCK PHASE".
• Automatic adjustments cannot be performed when images with blurred edges or dark images are input.
With Composite sync and G-SYNC sync signals and some types of PCs, it may not be possible to
perform these automatic adjustments.
In this case, manually adjust the items of "INPUT RESOLUTION", "CLOCK PHASE" and "POSITION".
• Image may be disturbed for about 4 seconds during automatic adjustment, which is not an abnormal
error.

Using the FREEZE function

The image on the screen displayed when you press the FREEZE button on the remote control is displayed as a still
image until you press the FREEZE button again.

Using the SHUTTER function

If the projector is not going to be used for a certain period of time such as while a meeting is on a break or
preparations are being made, the mechanical shutter can be used to hide the images temporarily.
Press the "SHUTTER" button of the remote control or the main unit.
The image is turned off.
Press the "SHUTTER" button again.
The image comes back.
Using the digital zoom (– D.ZOOM +) function
A portion of the picture on the screen can be zoomed in with "– D.ZOOM +" buttons of the remote control. It is
useful for highlighting a specific object during the presentation.
Product
A
E
18
B
5%
D
A
47
13%
C
122
C
76 32%
D
29%
21%
E
B
106
ADJ
TOTAL
B
C
2
32%
D
E
26
Press the "– D.ZOOM +" button of the remote control.
1999 2000 %
The image is zoomed in.
110 122
110%
Change the magnification with the "– D.ZOOM +"
131 106 81%
button.
64 76
119%
42 47
112%
The magnification can be adjusted from 1.0 to 3.0 times.
26 18 69%
Use
-5 -1
368 368
100%
image.
To restore the original image, press the "MENU"
131
button.
64
42
26
buttons to move the magnified
• The digital zoomed state cannot be stored in memory.
Note
• If the input signal format is changed while in digital
zoom mode, the projector will exit digital zoom
function.
• The combined magnification of "POSITION" zoom and
digital zoom is 9.99 times maximum.