60
en | Installing the In-Ceiling Mount
No.
Connector
Pin 1
P105
SERIAL
CODE-
COMMUNI-
(Audio IN-,
CATIONS
Audio in
signal
ground)
J101
Ethernet
Connector Input
Table 9.4: Interface Box Wire Terminals
Notice!
Pins for P105 1, 2, 4, and 5 are used for audio input and output for AUTODOME 7000 Series
cameras; however, their labels are still those of previous versions of analog AUTODOME
cameras.
Warning!
24 VAC Class 2 power supply only.
!
9.7
Installing the Ceiling (IP54 Housing) Gasket
In order to conform to the IP54 rating, you must install the ceiling gasket, illustrated (along
with the other pieces that protect the camera and provide the IP54 rating) in the figure below.
In addition, if you are using the optional black trim ring instead of the factory-installed white
trim ring, the trim ring gasket must also be in place to provide the IP54 protection. (Refer to
Replace the trim ring (optional) (In-ceiling models), page 66 for step-by-step installation
instructions.)
2016-07 | 1.0 | F.01U.283.679
Pin 2
Pin 3
CODE+
Earth GND
(Audio IN+)
(Ground)
(Audio)
Operation Manual
AUTODOME IP starlight 7000 HD
Pin 4
Pin 5
RXD
TXD
(Audio OUT+)
(Audio
OUT-;
Audio out
signal
ground)
Pin 6
Pin 7
Signal
GND
(Ground)
Bosch Security Systems