Secure Housing To Ceiling - Bosch VG4 Series Installation Manual

AutoDome Modular Camera System
3.8

Secure Housing to Ceiling

The In-Ceiling Housing is secured to the ceiling by two (2) screw clamps.
1. Insert the In-ceiling Mount Assembly through the hole in the ceiling.
2. Tighten both clamps using a #2 Phillips screwdriver, to secure the housing to the ceiling.
Tether
Point
Ceiling
CEILING
Clamp
CLAMP
12.7 Min.
12.7 MIN.
0.50 Ceiling
0.50 CEILING
Fig. 3.12 Secure Dome to Ceiling
CAUTION! Over torquing the Ceiling Clamps can damage the clamp or ceiling. Only tighten
!
the clamp until it contacts the ceiling and you start to feel some resistance. If using a power
screwdriver, set the torque level to the lowest setting.
Bosch Security Systems, Inc.
TETHER
POINT
mm
mm
inches
inches
Installation Manual
Installing the In-Ceiling Mount | en
Tether
TETHER
Point
POINT
Ceiling
CEILING
Clamp
CLAMP
41.7 Max.
41.7 MAX.
1.64 Ceiling
1.64 CEILING
Clockwise to
CLOCKWISE TO
Engage Clamp
ENGAGE CLAMP
F01U010921 | 1.0 | 2006.10
47