Panasonic KX-P1121E Operating Instructions Manual page 34

Maintenance & Troubleshooting
Symptom
Printout is double-spaced.
Keeps printing on the same line.
Both of the FONT LEDs are
blinking just after turning on the
power.
Wrong Character Set prints.
When printing on custom fanfold
paper, the print position shifts
after the second page.
34 Operating Instructions
Possible Cause
Auto LF is ON.
Computer is not sending a LF
command.
There is an electrical
malfunction.
Wrong Character Set is
selected.
The created custom paper size
(paper length) setting is
incorrect.
Probable Solution
Set Auto LF to OFF.
(Page 27)
Set Auto LF to ON.
(Page 27)
Consult your dealer.
Set the Character Set as required.
(Page 25)
When creating a custom size,
select "English" for Units and input
the size in inches. Round the value
to 2 decimal places, as in the
examples below:
Form size Input size
8 1/2 inch 8.50 inch
11 1/3 inch 11.34 inch