Single Sheets And Envelopes (Friction Mode) - Panasonic KX-P1121E Operating Instructions Manual

Single Sheets and Envelopes
(Friction Mode)
1.
A Turn the power on.
The PAPER OUT indicator will flash indicating that
no paper is installed in the printer.
B Adjust the head gap lever (A) for the
thickness of paper you are using.
Position
1 or 2 Thinner sheets
3, 4, 5 and 6
Thick sheets or envelopes
1
2
A
3
4
5
6
B
2.
Set the paper feed selector (A) to the "
position.
A
Used for
A
"
3.
Raise the top cover (A) to single sheet feed
position.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
A
4.
Raise the paper support (A).
A
5.
Insert a sheet of paper with the printed side face
down behind the platen by aligning its left edge
0
with on the top cover.
Setup
Operating Instructions 23