Storing A Job In Memory - Panasonic DP-C266 Operating Instructions Manual

Storing a Job in Memory

A copy job can be registered as a preset job. It is useful to register the frequently used settings as
Preset Jobs.
Refer to Recalling a Preset Job Stored in Memory (see page 37).
Once registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
A Proof Copy job cannot be registered in the job memory.
"M1:"/"M2:" cannot be registered when the Manual Skyshot mode is selected. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
1
Place original(s).
Refer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features (see pages
10 to 35 and 42 to 105).
4
Enter the desired number of copies.
5
Select "Preset Jobs".
36
6
Select "Save", and then select a job
button without a job registered.
The job button, in which a job has been
registered, has a job name.
7
Enter a job name, and then select
"OK".
Up to 20 characters can be entered.
For instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) of provided CD-ROM.
After completing the editing of the job name, press
the Reset key to return to the initial screen of the
currently active mode.