Job Build And Sadf - Panasonic DP-1515P Operating Instructions Manual

■ Job Build and SADF

Special originals (like thin paper, etc.) can be fed from
the ADF Tray and copied continuously using the Job
Build and SADF Mode.
1
2
3
Downloaded From ManualsPrinter.com Manuals
Place the Original(s).
For SADF : First one Original
Minimum 55 g/m 2
For Job Build : First Originals
Maximum 50 sheets (80 g/m
Face Up
Original Guides Tray
Adjust to the (Max. 50
original's width A4 size originals)
● Hold the Guide by the center when
adjusting the width.
Select the required settings.
(See page 10)
Enter the Number of Copies.
Keypad (Max. 999)
● When changing the number of copies,
re-enter it (3 digits) with the Keypad.
Ex: Changing from 2 to 5 copies.
Enter "005" with the Keypad.
● The default setting of Job Build and SADF is "OFF".
When using this mode, change the default setting to
"ON" in the Copier Settings. (See page 21)
4 Press Start key.
2 )
● When canceling the copy job, press the
STOP key, then press the
5 Place the next original(s) within
5 sec. of last ejected copy.
For SADF : First one Original
Minimum 55 g/m
For Job Build : First Originals
Maximum 50 sheets (80 g/m
START key
key.
2
2 )
17