Using Quality Preset
You can recall the registered quality adjustment settings by the following procedures.
For details on how to register image quality adjustment settings into Quality Preset, refer to Registering
Quality Preset (see page 22).
1
Place original(s).
Refer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select "Quality Adj.".
4
Select "Recall".
24
5
Select a Quality Preset button, and
then select "OK".
The selected Quality Preset settings are
reflected.
6
Select "OK".
7
Enter the desired number of copies.
8
Press the Start key.
Confirm the image quality of the copied
papers.
After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.