Table of Contents
Advertisement
1-2. Opening, closing and locking the doors
■
Setting and canceling the functions
To switch between set and canceled, follow the procedure below:
Close all the doors and switch the engine switch to the "ON"
STEP
1
position. (Perform step 2 within 10 seconds.)
STEP
2
Function
Shift position linked door lock-
*
ing function
Shift position linked door
unlocking function
Driver's door linked door unlock-
ing function
*
: Vehicles with an automatic transmission only
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
32
*
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch (
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions
corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Shift lever
Switch position
position
P
N
or
) for
to
the
Advertisement
Table of Contents
