Connect the jumper cable to ground on your vehicle as shown in
the illustration.
Start the engine of the second vehicle. Increase the engine
STEP
3
speed slightly and maintain at that level for approximately 5
minutes to recharge the battery of your vehicle.
Maintain the engine speed of the second vehicle, and turn
STEP
4
the engine switch to the "ON" position then start the vehi-
cle's engine.
Once the vehicle's engine has started, remove the jumper
STEP
5
cables in the exact reverse order in which they were con-
nected.
Once the engine starts, have the vehicle checked at your Toyota
dealer as soon as possible.
5-2. Steps to take in an emergency
5
429