Air Conditioning Operation - Hyundai 2003 Sonata Owner's Manual

1- 70
FEATURES OF YOUR HYUNDAI
B740A01S-AAT
AIR CONDITIONING SYSTEM
Air Conditioning Switch
The air conditioning is turned on or off by
pushing the A/C button on the heating/air con-
ditioning control panel.
B740B01A-AAT

Air Conditioning Operation

(If installed)
Cooling
HEF-041
To use the air conditioning to cool the interior:
o Set the side vent control to "
the outside air entry.
o Turn on the fan control switch.
o Turn on the air conditioning switch by push-
ing in on the switch. The air conditioning
indicator light should come on at the same
time.
o Set the air intake control to the fresh air
( ) position.
o Set the temperature control to "Cool". ("Cool"
provides maximum cooling. The tempera-
ture may be moderated by moving the con-
trol toward "Warm".)
o Adjust the fan control to the desired speed.
For greater cooling, turn the fan control to
one of the higher speeds or temporarily
select the recirculate (
air intake control.
B730A03Y-AAT
OPERATION TIPS
o To keep dust or unpleasant fumes from
entering the car through the ventilation sys-
tem, temporarily set the air intake control at
the position. Be sure to return the control
to the
passed to keep fresh air in the vehicle. This
will help keep the driver alert and comfort-
able.
HEF-023A
o Air for the heating/cooling system is drawn
in through the grilles just ahead of the wind-
shield. Care should be taken that these are
", to shut off
not blocked by leaves, snow, ice or other
obstructions.
o To prevent interior fog on the windshield, set
the air intake control to the fresh air (
position and fan speed to the desired posi-
tion.
o When the A/C is operated continuously on
the floor-defrost level (
( ), it may cause fog to form on the exterior
windshield by the temperature differencial.
At this time set the air flow control to the face
level position (
the low position.
) position on the
position when the irritation has
) or defrost level
) and fan speed control to
)