Adjustment After Headlight Assembly Replacement - Hyundai 2003 Sonata Owner's Manual

G290B02Y-AAT
Adjustment After Headlight Assembly
Replacement
0.827 in. (21 mm)
Horizontal line
Cut-off line
L
H
If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using the
aiming screen as shown in the illustration. Turn
on the headlight switch.
1. Adjust headlights so that main axis of light is
parallel to center line of the body and is
aligned with point "P" shown in the illustration.
2. Dotted lines in the illustration show the center
of headlights.
SPECIFICATION:
"H"
Horizontal center line of headlights from ground
:
Low Beam: 25.55 in. (649mm)
Vertical line
High Beam: 25.31 in. (643mm)
W
"W"
"P"
Distance between each headlight center :
Low Beam: 51.97 in. (1,320mm)
High Beam: 39.05 in. (992mm)
H
"L"
Distance between the headlights and the wall
Ground
that the lights are tested against : 118 in. (3,000
line
mm)
G290B02Y-1
DO-IT-YOURSELF MAINTENANCE
6- 27