Headlamp Aiming Adjustment; License Plate Light - Hyundai 2003 Sonata Owner's Manual

6- 26
DO-IT-YOURSELF MAINTENANCE
G270H01Y-GAT

License plate Light

1. Reomove the cover with a (+) driver.
2. Replace to the new bulb.
G290A05Y-AAT
HEADLIGHT AIMING ADJUSTMENT
Vertical
aiming
HEF-235
Before performing aiming adjustment, make
sure of the following.
1. Keep all tires inflated to the correct pressure.
2. Place the vehicle on level ground and press
the front bumper & rear bumper down sev-
eral times. Place vehicle at a distance of 118
in. (3m) from the test wall.
3. See that the vehicle is unloaded (except for
full levels of coolant, engine oil and fuel, and
spare tire, jack, and tools).
4. Clean the head light lenses and turn on the
headlights (Low beam).
5. Open the hood.
6. Draw the vertical line (through the center of
each headlight beam pattern) and the hori-
HEF-236
zontal line (through the center of each head-
light beam pattern) on the aiming screen.
And then, draw the parallel line at 0.827 in. (21
mm) under the horizontal line.
7. Adjust each cut-off line of the low beam to the
parallel line with a phillips screwdriver -
VERTICAL AIMING
!
WARNING:
Horizontal aiming should be adjusted by an
authorized Hyundai Dealer.
G290A03Y