Toyota 2001 Tundra Owner's Manual page 283

TRANSFER
Oil capacity, L (qt., Imp. qt.):
1.0 (1.1, 0.9)
Oil type:
Gear oil API GL–4 or GL–5
Recommended oil viscosity:
SAE 75W–90
DIFFERENTIAL
Oil capacity, L (qt., Imp. qt.):
Front
1.15 (1.2, 1.0)
Rear
Two–wheel drive models
3.80 (4.0, 3.3)
Four–wheel drive models
3.50 (3.7, 3.1)
Oil type:
Hypoid gear oil API GL–5
Recommended oil viscosity:
Front
SAE 75W–90
Rear
Above –18_C (0_F)
SAE 90
Below –18_C (0_F)
SAE 80W or 80W–90
'01 TUNDRA_U (L/O 0008)
CHASSIS LUBRICATION
Propeller shafts:
Spiders and slide yokes
Lithium base chassis grease, NLGI
No.2
Double cardan joint
Molybdenum–disulfide lithium
chassis grease, NLGI No.2
BRAKES
Minimum pedal clearance when depressed
with the force of 490 N (50 kgf, 110 lbf)
with the engine running, mm (in.):
95 (3.7)
Pedal free play, mm (in.):
1—6 (0.04—0.24)
Pad wear limit, mm (in.):
1.0 (0.04)
Lining wear limit, mm (in.):
1.0 (0.04)
Parking brake adjustment:
Pedal type—when depressed with the
force of 294 N (30 kgf, 66.1 lbf)
5—8 clicks
Lever type—when pulled with the force
of 196 N (20 kgf, 44 lbf)
4—12 clicks
Fluid type:
SAE J1703 or FMVSS No.116 DOT 3
2001 TUNDRA (OM34416U)
STEERING
Wheel free play:
Less than 30 mm (1.2 in.)
Power steering fluid type:
Automatic transmission fluid DEXRONrII
or III
base
275