Toyota 2001 Tundra Owner's Manual page 114

SHIFTING BETWEEN "4HI" AND "4LO"
To shift from "4HI" to "4LO", stop the
vehicle and put the transmission into "N".
With the brake pedal depressed, push the
"4LO" button. If the "2WD/4HI" button left
out, push in the "2WD/4HI" button to se-
lect the "4HI" mode.
If the "4LO" (low speed four–wheel drive)
indicator light flashes and the buzzer
sounds for 3 seconds when you push the
"4LO" button, this reminds you that the
transfer mode is not in "4LO" mode. Drive
forward or backward in a short distance,
then stop the vehicle completely, put the
transmission securely into "N" and push
the button again.
To shift from "4LO" to "4HI", stop the
vehicle and put the transmission into "N".
With the brake pedal depressed, push the
"4LO" button.
If the "4LO" (low speed four–wheel drive)
indicator light flashes and the buzzer
sounds for 3 seconds when you push the
"4LO" button, this reminds you that the
transfer mode is not in "4HI" mode. Drive
forward or backward in a short distance,
then stop the vehicle completely, put the
transmission securely into "N" and push
the button again.
'01 TUNDRA_U (L/O 0008)
SHIFTING BETWEEN "2WD" AND "4LO"
To shift from "2WD" to "4LO", stop the
vehicle and put the transmission into "N".
With the brake pedal depressed, push the
"2WD/4HI" button in to select the "4HI"
mode, then push the "4LO" button.
If the "4LO" (low speed four–wheel drive)
indicator light flashes and the buzzer
sounds for 3 seconds when you push the
"4LO" button, this reminds you that the
transfer mode is not in "4LO" mode. Drive
forward or backward in a short distance,
then stop the vehicle completely, put the
transmission securely into "N" and push
the button again.
To shift from "4LO" to "2WD", stop the
vehicle and put the transmission into "N".
With the brake pedal depressed, push the
"2WD/4HI" switch again to turn it off.
2001 TUNDRA (OM34416U)
If the "4LO" (low speed four–wheel drive)
indicator light flashes and the buzzer
sounds when you push the "2WD/4HI" but-
ton, this reminds you that the transfer
mode is not in "2WD" mode. Push the
"2WD/4HI" button in to return to "4LO"
mode, drive forward or backward in a
short distance, then stop the vehicle com-
pletely, put the transmission securely into
"N" and push the "2WD/4HI" button once
again.
If the "4LO" (low speed four–wheel drive)
indicator light flashes when you push the
"2WD/4HI" button, this reminds you that
the transfer mode is not in "2WD" mode.
Drive straight ahead while accelerating or
decelerating, or drive forward or backward
in a short distance.
107