1. Headlight coupler
2. Headlight bulb cover
Replacing the headlight bulb
This motorcycle is equipped with a
quartz bulb headlight. If the headlight
bulb burns out, replace it as follows.
1. Remove panel C. (See page 6-8
for panel removal and installation
procedures.)
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Headlight bulb holder
3. Unhook the headlight bulb holder,
EAU01822
and then remove the defective
bulb.
1. Do not touch this area.
@
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
@
4. Place a new bulb into position, and
6-40
WARNING
then secure it with the bulb holder.
EW000119
6