PERIODIC MAINTENANCE AND MINOR REPAIR
1. Cowling A
2. Cowling B
6
1. Slot (× 2)
2. Projection (× 2)
To install the cowling
1. Fit the slots and projections at the
rear bottom of each cowling to-
gether, and then slide the cowling
into place.
6-7
1. Tab (× 2)
2. Place the cowling in the original
position, and then install the
screws.
NOTE:
@
Make sure that the tabs at the front of
each cowling fit side by side as shown
and that all slots and projections fit to-
gether.
@