Yamaha 2001 YZF-R6N Owner's Manual page 72

PERIODIC MAINTENANCE AND MINOR REPAIR
8. Connect the radiator hose, and
then tighten the clamp screw.
9. Install the coolant drain bolt, and
then tighten it to the specified
torque.
NOTE:
@
Check the washer for damage and re-
place it if necessary.
@
Tightening torque:
Coolant drain bolt:
12 Nm (1.2 m·kg)
6
Left side
1. Bolt (× 2)
10. Remove the coolant reservoir cov-
er by removing the bolts.
6-17
Left side
1. Bolt (× 2)
11. Remove the coolant reservoir by
removing the bolts.
12. Remove the coolant reservoir cap,
and then turn the reservoir upside-
down to empty it.
13. Install the coolant reservoir by in-
stalling the bolts.
14. Pour the recommended coolant
into the reservoir to the maximum
level mark, and then install the cap
and cover.
15. Pour the recommended coolant
into the radiator until it is full.