Toyota 2003 Prius Owner's Manual page 251

83p015a
4. Install the rubber cover as shown,
and fit it securely on the boss. Plug
in the connector.
Make sure the rubber cover fits securely
on the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
232
—Parking lights
83p016
83p017
—Front turn signal lights
83p010
RIGHT–HAND FRONT TURN
LIGHT: Remove the clip and take out
the air cleaner inlet.
Remove and install the clip as shown in
the following illustration.
LEFT–HAND FRONT TURN SIGNAL: Re-
move the upper part of the washer fluid
reservoir while pinching the lever.
SIGNAL