Table of Contents
Advertisement
Replacing Rear Bulbs
(in Trunk Lid)
TRIM CLIP
1.
Open the trunk.
2.
6-cylinder models
Remove the trim clips from the
right or left corner of the trunk lid
trim by carefully prying them
using a small, flat-tip screwdriver
wrapped with tape.
3.
Carefully bend back the corner of
the trunk lid trim to expose the
bulbs.
4.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
SOCKETS
BULBS
SOCKETS
BULBS
5.
Install a new bulb into the socket,
and reinstall the socket into the
light assembly.
6.
Test the lights.
7.
Push the trunk lid trim back into
position.
8.
Press the trim clips back into their
holes.
Lights
CONTINUED
231
Advertisement
Table of Contents
