Table of Contents
Advertisement
1.
Make sure you have properly
completed the ''Training
HomeLink'' procedure.
2.
Find the ''Training'' button on your
garage door opener unit. The
location will vary, depending on
the manufacturer.
TRAINING BUTTON
Press the training button on the
3.
garage door opener unit until the
indicator next to the button comes
on, then release it. The indicator
may blink, or come on and stay on.
You then have approximately 30
seconds to complete the following
steps.
HomeLink Universal Transceiver
4.
Press and hold the button on
HomeLink for 3 to 4 seconds.
5.
Press and hold the HomeLink
button again for 3 to 4 seconds.
This should turn off the training
light on the garage door opener
unit. (Some systems may require
you to press the button up to three
times.)
6.
Press the HomeLink button again.
It should operate the garage door.
157
Advertisement
Table of Contents
