Components And Storage - Mercedes-Benz 2013 W218 Owner's Manual

Stowage areas
316
X
Raise box : and press hooks A into
anchorage ? as far as they will go.
X
Turn left-hand rotating catch B clockwise
and right-hand rotating catch B anti-clock-
wise by 90°.
X
To remove: turn left-hand rotating catch
B anti-clockwise and right-hand rotating
catch B clockwise by 90°.
X
Move box : downwards and pull it out
from anchorages ?.
i Store the EASY-PACK boot box on a flat
surface after removal, e.g. on a suitable
shelf.
EASY-PACK load-securing kit (CLS
Shooting Brake)

Components and storage

The EASY-PACK load-securing kit allows you
to use your luggage compartment for a variety
of purposes. The following accessory parts
are located under the luggage compartment
floor:
telescopic rod (on the underside of the lug-
R
gage compartment floor)
bag containing the brackets and luggage
R
holder (below the luggage compartment
floor or in one of the side stowage nets in
the luggage compartment)
Inserting the brackets into the loading
rail
X
Insert bracket : into the centre of loading
rail ?.
X
Press release button ; and push
bracket : into the desired position in load-
ing rail ?.
X
Let go of release button ;.
X
Press locking button =.
Bracket : is locked in loading rail ?.
X
If necessary, fold lashing eyelet A
upwards.
Luggage holder
! Only use the luggage holder to secure
loads with a maximum weight of 7 kg and
with dimensions that allow the loads to be
safely and securely retained by the luggage
holder.
The luggage holder can be used to secure
light loads against the side wall of the luggage
compartment to prevent them from moving
around.