Memory Function - Mercedes-Benz 2013 W218 Owner's Manual

X
Press memory button M ? and one of the
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the exterior mirror moves out of position,
repeat the steps.
Calling up a stored parking position set-
ting
Button for the exterior mirror on the driv-
:
er's side
Button for the exterior mirror on the front-
;
passenger side
Adjustment button
=
Memory button M
?
X
Turn the key to position 2 in the ignition
lock ( Y page 157).
X
Adjust the exterior mirror on the front-
passenger side using button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of
R
15 km/h
if you press button : for the exterior mir-
R
ror on the driver's side

Memory function

Memory function
Storing settings
G
WARNING
If you use the memory function on the driver's
side while driving, the adjustments could
cause you to lose control of the vehicle. There
is a risk of an accident.
Only use the memory function on the driver's
side while the vehicle is stationary.
G
WARNING
If children activate the memory function, they
could become trapped, especially if they are
unattended. There is a risk of injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint.
Active multicontour seat: seat contour,
R
dynamic function level
driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
117
Z