Ingenico 5100 Operating Manual page 60

SKYZER TECHNOLOGIES
10.0 PROCESSING NOW PROCESSING NOW PROCESSING NOW PROCESSING NOW
11.0
REMOVE CARD REMOVE CARD REMOVE CARD REMOVE CARD
12.0 ACCEPTED ACCEPTED ACCEPTED ACCEPTED
DECLINED DECLINED
13.0 DECLINED DECLINED
For Signature Transaction
NOTE: If the cardholder cannot remember their PIN or does not have a PIN, then the merchant has the option to accept
a signature transaction.
Complete steps 1-6 of the transaction process first
PIN OR ENTER PIN OR ENTER
14.0 PIN OR ENTER PIN OR ENTER
PROCESSING NOW PROCESSING NOW
15.0 PROCESSING NOW PROCESSING NOW
16.0
REMOVE CARD REMOVE CARD
REMOVE CARD REMOVE CARD
17.0
SIGN RECEIPT SIGN RECEIPT SIGN RECEIPT SIGN RECEIPT
18.0
SIGNATURE OK? Y/N SIGNATURE OK? Y/N SIGNATURE OK? Y/N SIGNATURE OK? Y/N
ENTER=YES,CLR=NO ENTER=YES,CLR=NO
ENTER=YES,CLR=NO ENTER=YES,CLR=NO
19.0
SIG ACCEPTED SIG ACCEPTED
SIG ACCEPTED SIG ACCEPTED
20.0
SIG DECLINED SIG DECLINED
SIG DECLINED SIG DECLINED
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
PROCESSING NOW will be displayed on the terminal and pinpad.
Remove card from the chip card reader.
NOTE: If no action is taken within 7 seconds, the terminal will proceed with
printing of the receipts and REMOVE CARD prompt will display again.
Transaction has been ACCEPTED with PIN entry and transaction receipt is printed.
Transaction has been DECLINED with PIN entry and transaction receipt is printed.
Advise the cardholder to press ENTER on the pinpad to proceed with a Signature
transaction.
PROCESSING NOW will be displayed on the terminal and pinpad.
Remove card from the chip card reader.
NOTE: If no action is taken within 7 seconds, the terminal will proceed with
printing of the receipts and REMOVE CARD prompt will display again.
SIGN RECEIPT will be displayed on both terminal and pinpad screen. Tear the
receipt off and ask the cardholder to sign receipt.
Verify the cardholder's signature with the signature on the back of the card. If the
signature matches:
Press ENTER to accept and proceed with step 19.0
If not, press CLEAR to decline and proceed with step 20.0
SIG ACCEPTED will be displayed on both the terminal and pinpad screen. The
merchant presses ENTER to accept the cardholder's signature after verifying
signature with the card.
SIG DECLINED will be displayed on both the terminal and pinpad screen. The
merchant presses CLEAR to decline the cardholder's signature after verifying
signature with the card.
PAGE 60 OF 97
Version 1.3