Ingenico 5100 Operating Manual page 43

SKYZER TECHNOLOGIES
INTERFACED INTERFACED INTERFACED INTERFACED
13.0
OFF OFF
OFF OFF
LICENSE KEY? LICENSE KEY?
13.1 LICENSE KEY? LICENSE KEY?
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
13.2 INTERFACED INTERFACED INTERFACED INTERFACED
ON ON
ON ON
SWIPE START SWIPE START
14.0 SWIPE START SWIPE START
OFF OFF OFF OFF
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Press CHQ to enable the INTERFACED function and proceed with the step 12.1 or
press CANCEL to disable the INTERFACED function and press ENTER.
The License Key can only be obtained from Skyzer Technologies. Key in the
License number followed by ENTER.
NOTE: Before entering the License key, please ensure that the date and time on
the terminal is current. There are two ways of updating the date and time on the
terminal:
1. By initiating a merchant logon
2. Manually changing the date and time – Refer to page 89.
Press ENTER to activate the INTERFACED function.
Press CHQ to enable or disable the SWIPE START function followed by ENTER.
NOTE: This swipe start function allows the merchant to deactivate the swipe start
from the idle screen. This feature will apply in the environment of Contactless or
Interface. For example, if the EFTPOS terminal is interfaced to a POS system, the
swipe start function can be enabled to restrict the cardholders swiping their card
before the EFTPOS terminal has received the transaction from POS system.
When the interface link or contactless is enabled on the terminal, the
swipe start function will automatically be deactivated and vice-versa.
PAGE 43 OF 97
Version 1.3