Causes For Client Deauthentication Immediately After Authenticating - HP 2530 Manual Supplement

Causes for client deauthentication immediately after authenticating

Table 12 Causes for client deauthentication
Result
ACE formatted incorrectly
in the RADIUS server
A RADIUS-assigned ACL
limit has been exceeded
An IPv6 ACE has been
received on a port and
either:
56 Updates for the HP Switch Software Access Security Guide
Cause
'from', 'any', or 'to' keyword missing.
An IPv4 or IPv6 protocol number in the ACE exceeds 255.
An optional UDP or TCP port number is invalid, or a UDP/TCP port number is specified
when the protocol is neither UDP or TCP.
An ACE in the ACL for a given authenticated client exceeds 80 characters.
The TCP/UDP port-range quantity of 14 per slot or port group has been exceeded.
The rule limit of 3048 per slot or port group has been exceeded.
The HP-Nas-Rules-IPv6 attribute is missing or HP-Nas-Rules-IPv6=2 is configured.
See Table 10 (page 42) for more on this attribute.