Charging The Battery - Panasonic D-SNAP SV-AS30 Operating Instructions Manual

Preparation

Charging the Battery

Be sure to turn this unit off before the following procedure. (When this
unit is turned on, the battery cannot be charged.) Use the AC adaptor
supplied for this unit.
1
Connect the AC mains lead to the AC adaptor and the
AC mains socket. And then connect the DC input lead
to the USB cradle.
• The AC mains lead does not fit entirely into the AC adaptor socket. A
gap will remain as shown 1.
• Open the lid 2 all the way up.
2
Confirm the direction of this unit and then attach it to
the USB cradle.
• Align the position of the connectors and then insert this unit firmly.
• The Charge Lamp 1 blinks and the charging starts.
• When charging is completed (the battery is fully charged in about
90 minutes), the charge lamp turns off.
• When charging is completed, pull this unit out straight from the USB
cradle.
14
VQT0N05
(continued)
2
1