Printing Pictures Directly Connecting To A Printer (Pictbridge) - Panasonic D-SNAP SV-AS30 Operating Instructions Manual

≥ When you want to listen to the audio being played, connect the
remote controller and the stereo earphones (supplied). (You cannot
listen to the audio on this unit.)
Printing Pictures Directly Connecting to a Printer
(PictBridge)
You can print still pictures played on this unit from the printer
supporting PictBridge connected to this unit with the USB cable
(supplied). (Turn the printer on beforehand.)
1
Set the mode to [Picture] mode. (P43)
2
Press the [MENU] button and then set the item with the
Jog Ball. (P18)
Setup
• Be sure to set the item above before connecting this unit with the
printer.
3
1
Connection
l
(USB)
Insert this unit firmly to the USB cradle
all the way.
• Connect the USB cradle to the power plug with
the AC adaptor and AC mains lead.
• Be sure to insert the charged battery and the
card into this unit.
Connect the USB cradle and the
printer with the supplied USB cable
1.
– [ACCESSING PICTBRIDGE/PTP] indication
appears.
• If the message [ACCESSING PC] is displayed,
disconnect the USB cable once and confirm
the setting in Step 2.
l
PictBridge
55
VQT0N05