Geomagnetic Correction - Panasonic QUINTRIX TX-86PW300A Operating Instructions Manual

Magnetic interference may come from such things as unshielded motors, moving the TV while it is switched
ON, turning off a vacuum cleaner too close to the TV, lightning strikes nearby or many other things.
Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of
the screen (colour purity).
The Geomagnetic Correction feature can be used to eliminate some interference problems.
Quite often simply switching your Television OFF with the Power On/Off Switch (not with the remote control)
for 30 minutes and then switching it back ON will cure the problem.
Geomagnetic corrections can be made from the remote control or from the TV set.
Using the Front Panel
1. Push the button repeatedly to access the
Geomagnetic Correction Menu.

Geomagnetic correction

- , + : Adjust tilt
F : To exit
STR F
2.
Push - / \/ or + / /\ to adjust the picture tilt or
coloured patches as necessary.
Geomag ne tic correction
- , + :
F :
STR F
The adjustment range is from -8 to +8.
3. Push the F button to return to normal viewing.
Helpful Hint
1. If geomagnetic changes cause colour patches on the screen switch your Television OFF with the
Power On/Off Switch (not with the remote control) for 30 minutes and then switch it back ON.
2. Adjustment for geomagnetic should be performed every time the location of the TV is changed.
3. In some cases colour patches will not be completely eliminated even after adjustment, particularly in
ferroconcrete buildings and other structures susceptible to geomagnetic effects. In these cases the TV
location will have to be changed.
Setup menu - Geomagnetic Correction
-/\/ +//\ TV/AV
000
Adjust tilt
To exit
- /\/ +/ /\ TV/AV
Using the Remote Control
1. Push the SET UP button
2. Select the Geomagnetic Correction Menu by
Pushing or
3. Push or to access the Geomagnetic
Correction.
Geomagnetic correction
4. Push or to adjust the picture tilt or
coloured patches as necessary.
The adjustment range is from -16 to +16.
5. Push the SET UP button to return the TV to
the Set Up Menu.
OR
6. Push the TV/AV button to return to normal
viewing.
.
.
000
19