Geomagnetic Correction - Panasonic TC-29P250H Operating Instructions Manual

Geomagnetic Correction

Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of the screen
(colour purity). The Geomagnetic Correction feature can be used to eliminate them, if necessary.
The power should be off when determining the
installation location and direction.
At this time please verify what direction the TV
screen is to face (direction indicated by the arrow).
Press the main power switch.
Geomagnetic corrections can be made from the remote control or the TV set.
Operation from remote control
PICTURE
SOUND
SET UP
SET UP 1.Press the SET UP button.
2.Select the Geomagnetic correction
menu by pressing
GEOMAGNETIC CORRECTION
RETURN
3.Press
adjust the picture
t i l t o r c o l o u r e d
p a t c h e s
necessary.
4.Press the TV/AV
TV/AV
button to exit the
G e o m a g n e t i c
correction menu.
Helpful Hint
1. If geomagnetic changes still cause colour patches on the screen even after the TV is installed, turn the power off and turn back on
again after about 30 minutes.
2. Adjustment for geomagnetic should be performed every time the location of the TV is changed.
3. In some cases colour patches will not be completely eliminated even after adjustment, particularly in ferro-concrete buildings and
other structures susceptible to geomagnetic. In these cases adjust by changing the installation location.
16
(Remote Control)
.
ADJUST TILT
TV/AV E X I T
or to
+
002
a s
Normal
Viewing
Operation from the TV
STR F –/ +/ TV/AV
1.Press the F ( FUNCTION ) button
F
t o a c c e s s t h e G e o m a g n e t i c
correction menu.
GEOMAGNETIC CORRECTION
–, + : ADJUST TILT
F : TO EXIT
STR F
2.Press
–/
–/ +/
adjust the picture tilt
or coloured patches
as necessary.
3.P r e s s
F ( F U N C T I O N )
F
button to exit the
G e o m a g n e t i c
correction menu.
Power ON
(TV set)
– / +/ TV/AV
or to
+/
+
002
– / + :
F :
t h e
Normal
Viewing