Recall; Normalisation; Str - Panasonic QUINTRIX TX-86PW300A Operating Instructions Manual

BUTTON
Please refer to drawing on Page 8 for location of Remote Control Buttons.
Remote Control Television Operation
PIP (Picture In Picture) Mode
Allows a small picture to be viewed inside the
main picture.
Pressing the Red button will switch to the PIP.
The Yellow button will switch to the PAP mode.
The Blue button swaps the position of the two
pictures.
POP (Picture Out Of Picture) Mode
Allows two pictures to be viewed at the same
time. The pictures will be shown side by side.
The main picture is larger
Pressing the Red button will switch to the PAP.
The Yellow button will switch to the PIP mode.
The Blue button swaps the position of the two
pictures.
PAP (Picture And Picture) Mode
Allows two equal sized pictures to be viewed at
the same time. The pictures will be shown side
by side.
Pressing the Red button will switch to the PIP.
The Yellow button will switch to the POP mode.
The Blue button swaps the position of the two
pictures.
Changing channels in MULTI PIP mode
When the On-Screen display (coloured boxes) is ON, the sub picture can be
changed. Use the normal TV/AV button to switch between each of the 5 AV inputs
and the RF input.
When the On-Screen display (coloured boxes) is OFF, the main picture can be
changed. Use the normal programme or AV select buttons.

RECALL

Pressing this button will display all current active functions. The functions that can
be displayed include AV Number, Programme Number, Colour system, Sound
Option, Picture Option, Stereo or Mono and Off-Timer setting. Pressing the button
again cancels the recall function and removes the text being displayed on the
screen.
If the button is not pressed within about 2 seconds it automatically switches to
display the Programme Number or the AV Number and the Off-Timer setting.
Pressing the button again cancels the recall function and removes the text being
displayed on the screen.

NORMALISATION

The Normalisation Button is used to reset the television to factory set levels.
Colour, Sharpness, Contrast, Brightness, Treble, Bass and Balance will be reset.
The button will only operate if the menu is displayed on the screen.

STR

The STR (Store) button is used with a number of features to store settings after
adjustments have been made or options have been set. It is also used in
TELETEXT and tuning functions.
WHAT IT DOES
28
POP
28
PAP
28
PIP
AV1
PAP CHANGE
AV1
PIP CHANGE
AV1
POP CHANGE
11