Adjusting The Head Restraint - Mercedes-Benz B-Class Operator's Manual

i You can store the seat settings using the
memory function ( Y
Adjusting the head restraints
G
WARNING
You could lose control of your vehicle if you
do the following while driving:
adjust the driver's seat, head restraint,
R
steering wheel or mirrors
fasten the seat belt
R
There is a risk of an accident.
Adjust the driver's seat, head restraint,
steering wheel and mirror and fasten your
seat belt before starting the engine.
G
WARNING
If head restraints are not installed and
adjusted correctly, they cannot provide
protection as intended. There is an increased
risk of injury in the head and neck area, e.g.
in the event of an accident or when braking.
Always drive with the head restraints
installed. Before driving off, make sure for
every vehicle occupant that the center of the
head restraint supports the back of the head
at about eye level.
Adjusting the head restraints manually
Adjusting the head restraint height
page 95).
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : in the
direction of the arrow and push the head
restraint down to the desired position.
Adjusting the fore/aft position of the
head restraint
With this function you can adjust the distance
between the head restraint and the back of
the seat occupant's head.
X
To adjust forwards: pull the head restraint
forwards in the direction of the arrow until
it engages.
There are several notches.
X
To move backwards: press and hold
release button : and push the head
restraint backwards.
X
When the head restraint is in the desired
position, release the button and make sure
that the head restraint is engaged in
position.
Adjusting the height of the head
restraints electrically
X
To adjust the head restraint height: slide
the switch for head restraint adjustment
( Y page 88) up or down in the direction of
the arrow.
Seats
89
Z