Convenience Submenu - Mercedes-Benz B-Class Operator's Manual

Activating/deactivating the acoustic
locking verification signal
Acoustic Lock
If you switch on the
Feedback:
function, an acoustic signal
sounds when you lock the vehicle.
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Vehicle
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Acoustic Lock Feedback:
You will see the selected setting:
or Disabled.
X
Press the a button to save the setting.
Activating/deactivating the radar sensor
system
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Vehicle submenu.
X
Press a to confirm.
X
Press the 9 or : button to select
Radar Sensor (See Oper.
You will see the selected setting:
or Disabled.
X
Press the a button to save the setting.
Convenience
Switching the fold-in mirrors when
locking feature on/off
This function is only available on vehicles with
the memory function (
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Convenience submenu.
X
Press a to confirm.
Sett
menu.
function.
Enabled
Sett
menu.
Manual).
Enabled
Y page 95).
Sett
menu.
Menus and submenus
X
Press the : or 9 button to select the
Fold Mirrors in when Locking:
You will see the selected setting:
or Disabled.
X
Press the a button to save the setting.
Fold Mirrors in when
If you switch on the
Locking:
function, the exterior mirrors fold
in when you lock the vehicle. If you unlock the
vehicle and then open the driver's or front-
passenger door, the exterior mirrors fold out
again.
If you have switched the function on and you
fold the exterior mirrors in using the button
on the door ( Y page 93), they will not fold out
automatically. The exterior mirrors can then
only be folded out using the button on the
door.
Restoring the factory settings
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Factory Setting
X
Press a to confirm.
Reset All Settings?
The
appears.
X
Press the : or 9 button to select
No or Yes.
X
Press a to confirm the selection.
If you have selected
display shows a confirmation message.
For safety reasons, the
Lights:
function in the
only reset if the vehicle is stationary.
Enabled
Sett
menu.
submenu.
message
Yes
, the multifunction
Daytime Running
Lights
submenu is
Z
199