Transporting The Vehicle - Mercedes-Benz B-Class Operator's Manual

Towing the vehicle with the front axle
raised
! The ignition must be switched off if the
vehicle is being towed with the front axle
raised. Otherwise, ESP
damage the brake system.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
When the vehicle is stationary, depress the
brake pedal and keep it depressed.
X
Shift the automatic transmission to
position P.
X
Release the brake pedal.
X
Release the electric parking brake.
X
Deactivate automatic locking
( Y page 198).
X
Switch on the hazard warning lamps
( Y page 101).
X
Turn the SmartKey to position 0 in the
ignition lock and leave the SmartKey in the
ignition lock.
When towing your vehicle with the front axle
raised, it is important that you observe the
safety instructions ( Y
Towing a vehicle with both axles on
the ground
G
WARNING
The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.
i In order to signal a change of direction
when towing with the hazard warning lamps
switched on, use the combination switch as
usual. In this case, only the turn signals for
the desired direction flash. When you reset
the combination switch, the hazard
warning lamps start flashing again.
®
may intervene and
page 291).
Towing and tow-starting
The automatic transmission automatically
shifts to position P when you open the driver's
or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position N when towing the vehicle,
you must observe the following points:
X
Make sure that the vehicle is stationary.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Depress and hold the brake pedal.
X
Shift the automatic transmission to
position N.
X
Leave the SmartKey in position 2 in the
ignition lock.
X
Release the brake pedal.
X
Release the electric parking brake.
X
Switch on the hazard warning lamps
Y
( page 101).
It is important that you observe the safety
instructions when towing away your vehicle
( Y page 291).

Transporting the vehicle

! Only lash the vehicle down by the wheels
or wheel rims, not by parts of the vehicle
such as axle or steering components.
Otherwise, the vehicle could be damaged.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Shift the transmission to position N.
As soon as the vehicle is loaded:
X
Prevent the vehicle from rolling away by
applying the electric parking brake.
X
Shift the transmission to position P.
X
Turn the SmartKey to position 0 in the
ignition lock and remove it.
X
Secure the vehicle.
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporting
purposes.
293
Z