Step5: Connect Other Cables - Onkyo TX-RZ610 Basic Manual

SN29402171_TX-RZ610_BAS_En_1602xx.book 17 ページ ２０１６年２月４日 木曜日 午後１時４４分
> Before start > Hookup

Step5: Connect Other Cables

Antenna Hookup
Move the antenna around while playing the radio to find
the position with the best reception. Use a thumb tack or
similar to attach the indoor FM antenna to a wall.
AM
FM
> Setup > Playback
AM loop antenna
Indoor FM antenna
> Part Names
Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy network features such as
internet radio, Music Server, and AirPlay by connecting the
unit to the network.
If you connect by wired LAN, connect with an Ethernet
cable to the ETHERNET port as shown in the illustration.
To connect by Wi-Fi, then after selecting "Wireless" in "3.
Network Connection" ( P19) in Initial Setup, select the
desired setting method and follow the onscreen
instructions to configure the connection.
Power Cord Hookup
This unit includes removable power cords. Connect the
power cord to the power outlet after completing all other
connections. Connect the power cord to AC INLET of the
unit and then connect to the outlet. Always disconnect the
outlet side first when disconnecting the power cord.
En
17