MULTISCREEN DISPLAY
Designates image to be displayed on the monitor connected to the QUAD connector by the CGI commands. It is
possible to select whether to display in multiscreen (quad) or to display one of the 4 image sources.
■ Format
http://(IP address of the decoder)/control4?video=out&ch=(parameter value)
■ Response
CR
HTTP /1.1 200 OK
LF
Cache-Control: no-cache
Content-Type: text/plain
CR
Content-Length: XX
CR
LF
OK or NG
■ Important Notice
• "video=out & ch=(parameter value)" (Required)
■ Control Item List
Item
Multiscreen
VIDEO OUT channel
■ Examples
1. To display the images in a multiscreen
http://192.168.0.11/control4?video=out&ch=05
2. To display the image from VIDEO OUT channel 1
http://192.168.0.11/control4?video=out&ch=01
CR
LF
CR
LF
(XX: Display the octet number of the Message-Body decimally)
LF
Parameter name
Parameter value
video
out
ch
01 - 05
Description
Identifier to display multichannel
Select one of the VIDEO OUT channel
numbers, or select 05 to display 4 images
in a multiscreen (QUAD).
107